Passat Wagon L4-2.0L Turbo (BPY) (2008)
/Page-336003.png)
-
Remove the bolts - 1 and 2 - using the commercially available 1/4" reversible ratchet and T30 TORX bit.
‹› The rear bolt - arrow - can only be removed with a reversible ratchet. The space between the bolt and coolant pipe is very small.
-
Remove the intake flap motor from the intake manifold.
Installing
Installation is performed in the reverse order of removal, noting the following:
-
Install the bolts - 1 and 2 - by hand to avoid damaging the threads.
