Passat Wagon L4-2.0L Turbo (BPY) (2008)
-
Disconnect the connector - 2 - from the passenger front airbag crash sensor (G284) - 3 -.
-
Remove bolts - 1 - (4.5 Nm).
Installation
-
To install, perform the steps used for removal in reverse order.
-
Switch on ignition.
CAUTION!
Make sure that no persons are in the vehicle.
-
Connect vehicle battery.
Driver Side Airbag Crash Sensor
Crash Sensors
Driver Side Airbag Crash Sensor
The driver side airbag crash sensor (G179) may be installed in several different locations:
‹› On the outside of the front door subframe
‹› On the inside of the front door subframe
Installed on Outside of Subframe