Passat Wagon L4-2.0L Turbo (BPY) (2008)
Wiring Harness: Service Precautions
Fiber Optic Cables
Fiber Optic Cables
NOTE: Observe general notes for repairs on the vehicle electrical system.
For Volkswagen, no repairs are performed on fiber optic cables. For a repair, the entire fiber optic cable is replaced. Observe the following safety
precautions for this:
NOTE:
-
Fiber optic cables must not be sharply bent, bending radius must be no less than 25 mm.
-
Fiber optic cables must not be routed over sharp edges.
-
End pieces (lenses) must not be soiled or grasped with bare fingers.
-
Fiber optic cables may not be heated.
-
It is not permitted to twist together two fiber optic cables or one fiber optic cable with a copper wire.