Passat Wagon L4-2.0L Turbo (BPY) (2008)
The tab on the retainer - 1 - must fit into the recess in the left front body acceleration sensor - arrow -.
‹› Be sure to use the correct retainer. An L is stamped on the retainer.
Right Front Body Acceleration Sensor
-
Attach the front right body acceleration sensor to the retainer.
-
Be sure to pay attention to the installation position of the right front body acceleration sensor retainer.
The tab on the retainer - 1 - must fit into the recess in the right front body acceleration sensor - arrow -.
‹› Be sure to use the correct retainer. An R is stamped on the retainer.
Continuation for Both Sides
-
Remove the adhesive on the sealing surfaces of the retainer and apply two-sided adhesive tape.
-
Using an dia. 11 mm drill, secure the retainer and the (VW 222 A)