Passat Wagon L4-2.0L Turbo (BPY) (2008)
/Page-1225001.png)
Fluid - A/T: Service and Repair
ATF, Draining
ATF, Draining
-
Turn off engine.
-
Remove sealing plug in oil pan - arrow - to check ATF.
-
Remove overflow tube - 1 - through check hole.
-
Drain ATF.
-
Install overflow tube.
-
Install sealing plug hand tight.
-
Add 3 liters ATF through filling tube.
-
Start engine, shift through all selector lever positions, you must remain shifted in each position approximately 10 seconds.
-
Then check ATF level and top off => [ ATF Level, Checking ] See: Testing and Inspection.
