Passat Wagon L4-2.0L Turbo (BPY) (2008)
-
Remove oil pan together with seal.
Installing
Installation is in reverse order of removal. Pay attention to the following:
-
Clean two magnets in oil pan recesses. Ensure that the magnets are in full contact with the oil pan.
-
Check seal for damage and make sure all of the spacers (quantity: 8) are present.
Otherwise, replace the seal.
-
Install oil pan and seal; when doing this be sure not to pinch any lines.
-
Make sure oil pan seal is properly seated.
-
Tighten oil pan bolts - arrows - in diagonal sequence and in stages, tightening torque => [ Valve Body Tightening Specifications ] See: Valve
Body/Specifications/Valve Body Tightening Specifications - Gears, Hydraulic Controls.