Passat Wagon L4-2.0L Turbo (BPY) (2008)
In order to remove cable, - pin - must be pressed upward using a screwdriver.
-
Simultaneously, press securing tab, which secures the - pin -, toward front - arrows -.
-
Remove locking washer. Always replace locking washer.
-
Remove selector lever cable.
Installing
-
Loosen cable adjustment screw.
Do not grease cable.
-
Route selector lever cable free of tension, also insert into bracket at transmission but do not secure yet.
-
Also clip cable in retainer. Make sure that retainer does not make contact with oil cooler.
- Nuts - 8 Nm