Passat Wagon L4-2.0L Turbo (BPY) (2008)
Specifications/Valve Body Tightening Specifications - Gears, Hydraulic Controls.
-
Connect connectors (quantity 8) to the solenoid valve => [ Line Routing, Connectors and Bracket on Valve Body ] See: Line Routing, Connectors
and Bracket on Valve Body.
-
Connect bracket for connectors => [ Line Routing, Connectors and Bracket on Valve Body ] See: Line Routing, Connectors and Bracket on Valve
Body, tightening specification => [ Valve Body Tightening Specifications ] See: Specifications/Valve Body Tightening Specifications - Gears,
Hydraulic Controls.
-
Connect connectors
-
Attach valve body from the inside toward the outside diagonally; tightening specification => [ Valve Body Tightening Specifications ] See:
Specifications/Valve Body Tightening Specifications - Gears, Hydraulic Controls.
-
Install shift lever.
-
Tighten nut for selector lever - 1 -, tightening torque => [ Valve Body Tightening Specifications ] See: Specifications/Valve Body Tightening
Specifications - Gears, Hydraulic Controls.
-
Carefully hold shift lever - 1 - in place using pliers - 2 - so that torque is not transferred to Multi-Function Transmission Range (TR) Switch
(F125).
-
Bend securing plate on nut up.
-
Remove oil strainer => [ Oil Strainer ] See: Fluid Filter - A/T/Service and Repair.
-
Install oil pan => [ Automatic Transmission Fluid Pan ] See: Fluid Pan/Service and Repair.
-
Add ATF, check ATF level and top off => [ ATF Level, Checking ] See: Fluid - A/T/Testing and Inspection.