Passat Wagon L4-2.0L Turbo (BPY) (2008)
1
Brake Fluid Reservoir
2
Spring Type Clamp
‹› Not equipped on all vehicles.
3
Supply Hose
‹› Made out of plastic
4
Master Cylinder
‹› Remove after removing the mounting bracket, refer to => [ Master Cylinder ] See: Clutch Pedal and Hydraulics.
5
Clip
‹› To remove and install the hose/line assembly or plastic line, pull the clip out to the stop.
‹› It is also pulled out to the side on some master cylinders.
6
Seal/O-ring
‹› Installed onto the line connection.
‹› Install with brake fluid
7
Mount
‹› To remove and install, separate the master cylinder from the clutch pedal. Refer to => [ Clutch Pedal ] See: Clutch Pedal and Hydraulics.