Passat Wagon L4-2.0L Turbo (BPY) (2008)
Flex Plate: Service and Repair
Drive Plate
Special tools, testers and auxiliary items required
‹› Flywheel Lock Adapter (VW 558)
‹› Depth Gauge
‹› M8 x 45 bolt and two M10 nuts
Loosening and Tightening
-
Secure the (VW 558) to the drive plate using the M8 x 45 bolt. Install two M10 nuts between the (VW 558) and the drive plate.
(VW 558) installed position: - A - to loosen, - B - to tighten.
Installing
-
Position the drive plate in place, using the washer with notches - 1 -.
-
Install new bolts - 3 - and tighten them to 30 Nm.
-
Check dimension - a - an three points and calculate the mean value.
Specified value: 19.5 to 21.1 mm