Passat Wagon L4-2.0L Turbo (BPY) (2008)
Differential: Adjustments
Differential, Adjusting
=> [ Determining Shim Thickness ]
Special tools, testers and auxiliary items required
‹› Transmission Support (VW 353)
‹› Magnetic Plate 50 mm Dia. (VW 385/17)
‹› Dial Gauge Holder (VW 387)
‹› Thrust Plate (VW 402)
‹› Punch (VW 408 A)
‹› Thrust Pad (3005)
‹› Tube (3259)
‹› Press Tool (3345)
‹› Torque Wrench (5-50 Nm) (V.A.G 1331)
‹› Kukko Extractor 46-58 mm (21/7)
‹› Kukko Support (22/2)
A new differential adjustment is required when the following components have been replaced:
‹› Transmission housing
‹› Clutch housing
‹› Differential housing or
‹› Differential tapered roller bearing
List of adjustments, refer to => [ Adjustment Overview ] See: Service and Repair/Overhaul/Adjustment Overview.
-
Pressing the outer race/tapered roller bearing with shim into the clutch housing.
‹› Pay attention to the shim installed position.
‹› The collar on the inner circumference faces the seal.