Passat Wagon L4-2.0L Turbo (BPY) (2008)
/Page-1337001.png)
Differential: Overhaul
Adjustment Overview
Adjustment Overview
‹› When performing repairs on the transmission, readjustment of the output shaft for 1st to 4th gears, output shaft for 5th/6th gear and reverse gears
or differential is only required if components, which have a direct influence on transmission adjustment, have been replaced. Refer to the following
table to avoid unnecessary adjustments:
Table of Contents
Disassembly and Assembly
=> [ Differential ] See: Differential
Differential
Differential
Special tools, testers and auxiliary items required
‹› Thrust Plate (VW 402)
‹› Punch (VW 408 A)
‹› Thrust Disc (VW 412)
‹› Thrust Piece (40-105)
‹› Thrust Pad (3005)
‹› Thrust Piece (VW 473), with right stub shaft
‹› Tube 60 mm dia. (VW 415 A), with right flange shaft
‹› Tube (3259)
‹› Tube (3296)