Passat Wagon L4-2.0L Turbo (BPY) (2008)
Seals and Gaskets: Service and Repair
02Q Transmission
Input Shaft Seal
Input Shaft Seal
Special tools, testers and auxiliary items required
‹› Pulling Hook (T20143/1)
‹› Thrust Piece (T40008)
‹› Sealing Grease (G 052 128 A1)
Removing
‹› Remove the transmission.
-
Remove the slave cylinder with release bearing. Refer to => [ Slave Cylinder with Release Bearing ] See: Clutch/Clutch Release Bearing/Service
and Repair/Slave Cylinder With Release Bearing.
-
Pry out the input shaft seal using the (T20143/1).
‹› Do not damage the seal running surface on the input shaft.
Installing
-
Fill the space between the sealing lip and dust lip - arrow - halfway with sealing grease (G 052 128 A1).