Passat Wagon L4-2.0L Turbo (BPY) (2008)
Shifter M/T: Service and Repair
Shift Knob, Boot and Noise Insulation
Shift Knob, Boot and Noise Insulation
Special tools, testers and auxiliary items required
‹› Hose Clamp Pliers (V.A.G 1275)
‹› Special Hook (3370)
Removing
-
Open the ashtray.
-
Remove the boot with plastic frame from the center console frame - 1 - - arrow -.
-
Hold the center console frame securely - 1 -.
It must not be removed.
Connectors for various switched could be loosened unintentionally.
-
Roll the boot up over the shift knob.
-
Open the clamp - arrow - and remove the shift knob and boot.
-
Remove the noise insulation.