Passat Wagon L4-2.0L Turbo (BPY) (2008)
Metal Relay Lever
-
Remove the retaining washer - 4 - for the selector cable from the relay lever - 2 -.
-
Remove the selector cable from the pin - arrow -.
Plastic Relay Lever
Disconnecting the Cable Retainer from the Selector Cable
‹› To avoid damage to the selector cable, the cable retainer must be disconnected from the selector lever before removal.
-
Pull the securing mechanism forward as far as the stop in the direction of - arrow 1 - and then unlock to the left in the direction of - arrow 2 -.
-
Then press the relay lever forward (- direction of arrow 3 -).
-
Remove the relay lever with the cable retainer. Refer to => [ Plastic Relay Lever
from 03.07 ] See: Shift Linkage/Shift Cable/Description and Operation.
Continuation for All Shift Mechanisms
The cable mounting bracket is secured with either two bolts and a nut - arrows -,