Passat Wagon L4-2.0L Turbo (BPY) (2008)
-
While cutting window free, push cutting cord with plastic wedge against window in order to have clearance at window flange.
-
In place of (V.A.G 1654), the (V.A.G 1654 A) can also be used.
-
As shown in illustration, one suction cup can be removed from (V.A.G 1654). By doing this, the roller of the (V.A.G 1654 A) can be placed closer
to window flange.
Damaged Side Window
Flush Bonded Windows
Damaged Side Window
The procedure for removing a broken side window is identical to removing a broken rear window. Refer to => [ Damaged Rear Window ] See:
Service and Repair/Removal and Replacement/Flush Bonded Windows/Damaged Rear Window
Side Window
Flush Bonded Windows
Side Window
Preparing undamaged window for glazing, refer to => [ Undamaged Window, Preparing for Glazing ] See: Service and Repair/Removal and
Replacement/Flush Bonded Windows Overview.
Window, new, preparing for glazing, refer to => [ Preparing New Window without Pre-Coating for Glazing ] See: Service and Repair/Removal and
Replacement/Flush Bonded Windows Overview
Preparing window flange for glazing, refer to => [ Window Flange, Preparing for Glazing ] See: Service and Repair/Removal and Replacement/Flush
Bonded Windows Overview.
Minimum curing time, refer to => [ Minimum Curing Time ] See: Service and Repair/Removal and Replacement/Flush Bonded Windows Overview.