Passat Wagon L4-2.0L Turbo (BPY) (2008)
‹› While removing, the complete rain/light recognition sensor and not only the upper shell of rain/light recognition sensor must be pried off.
Installing:
Install in reverse order of removal, noting the following:
-
Thoroughly clean the area of the windshield inside the retaining plate with isopropyl alcohol.
-
Remove the cap from the new rain/light recognition sensor.
‹› Surface (connecting pads) of rain/light recognition sensor must not be soiled when installing.
‹› If the surface (connecting pads) of rain/light recognition sensor is soiled, it can be potentially cleaned by applying and then pulling off one or more
adhesive strips.
-
Insert the rain/light recognition sensor - 1 - into the retaining plate - 2 - on the windshield and press it in securely.