Passat Wagon L4-2.0L Turbo (BPY) (2008)
Wiper Arms
Special tools, testers and auxiliary items required
‹› Torque Wrench (V.A.G 1331/)
‹› Puller (T10369)
Removing:
-
Pry off cover caps - arrows - using a suitable screwdriver.
-
Slide the arms of the (T10369/1) - 2 - under the wiper arm - 4 - as shown in the illustration.
CAUTION!
The windshield wiper shaft can be damaged.
Always use the thrust piece - 3 - to loosen the wiper arm.
-
Turn the pressure bolt - 1 - on the puller clockwise until the thrust piece - 3 - makes contact with the wiper shaft. Using a 6 mm socket head
wrench, rotate the pressure bolt - 1 - on the puller clockwise until the wiper arm - 4 - is released from the shaft.
-
Remove the puller and the wiper arm.
-
If necessary, repeat this procedure on the front passenger's side.
Installing: