Passat Wagon L4-2.0L Turbo (CCTA) (2009)
-
Lubricate the balance shaft bearing with engine oil.
-
Install the intake camshaft balance shaft.
-
Replace the O-Ring - 1 - and coat with engine oil.
-
Coat the bearing pin with engine oil and install it - arrow -; the bearing pin must engage in the hole in the cylinder block.
-
Mark the tooth face on the intermediate sprocket - arrows -.
-
Install the intermediate sprocket; the marking on the balance shaft must be between the markings on the tooth faces.
-
Tighten the chain sprocket bolt - 1 -: Tightening sequence => [ Chain sprocket, tightening sequence ] See: Balance Shaft Chain/Service and
Repair/Balance Shaft Timing Chain, Assembly Overview.