Passat Wagon L4-2.0L Turbo (CCTA) (2009)
Instrument Panel Control Module: All Technical Service Bulletins
Instruments - Incorrect Message Displayed On MFD
90 10 07
August 18, 2010
2023212
Vehicle Information
Condition
Update Programming, Gateway Control Module, Incorrect Message in Multifunction Display (MFD)
Incorrect message in the MFD To start, please operate clutch
Note:
The condition as described does not affect normal vehicle starting or vehicle operation.
Technical Background
On vehicles with automatic transmissions, the message "Please operate clutch" is displayed after switching ON ignition.
Incorrect software in the diagnosis interface (Gateway control module).
Production Solution
Improved software was introduced in production beginning 2/2010.
Service
Update-Programming Procedure:
Tip:
To Update-Programming using SVM, review and follow instructions in Technical Bulletin Instance 2014603 "Software Version Management".
The SVM Process must be completed in its entirety so the database receives the update confirmation response. A warranty claim may not be reimbursed
if there is no confirmation response to support the claim.
Note