Passat Wagon L4-2.0L Turbo (CCTA) (2009)
![background image](/volkswagen/passat_wagon/l4-2.0l_turbo_(ccta)/Page-723001.png)
Shift Solenoid: Service and Repair
Solenoid Valve and Sensor Wiring Harness
Removing
-
Draining ATF => [ ATF, Draining ] See: Automatic Transmission/Transaxle/Fluid - A/T/Service and Repair/ATF, Draining.
-
Remove oil pan => [ Automatic Transmission Fluid Pan ] See: Automatic Transmission/Transaxle/Fluid Pan/Service and Repair.
-
Remove oil strainer => [ Oil Strainer ] See: Automatic Transmission/Transaxle/Fluid Filter - A/T/Service and Repair.
-
Remove valve body => [ Valve Body, Removing ] See: Automatic Transmission/Transaxle/Valve Body/Service and Repair/Valve Body.
-
Disconnect connector from the transmission.
- 1 - transmission sensor terminal
- 2 - connector for solenoid valves
-
Disconnect connector housing from transmission.
-
Disconnect connector housing together with wiring harness outward from transmission housing.
Installing
-
Replace sealing ring on connector housing.
-
Carefully guide wiring harness from outside into the transmission.
-
Coat connector housing sealing ring with ATF and then press connector housing all the way into transmission.
-
Connect connector housing; tightening specification => [ Valve Body Tightening Specifications ] See: Automatic Transmission/Transaxle/Valve
Body/Specifications/Valve Body Tightening Specifications - Gears, Hydraulic Controls.
-
Install valve body => [ Valve Body, Installing ] See: Automatic Transmission/Transaxle/Valve Body/Service and Repair/Valve Body.
-
Remove oil strainer => [ Oil Strainer ] See: Automatic Transmission/Transaxle/Fluid Filter - A/T/Service and Repair.
-
Install oil pan => [ Automatic Transmission Fluid Pan ] See: Automatic Transmission/Transaxle/Fluid Pan/Service and Repair.
-
Add ATF, check ATF level and top off => [ ATF Level, Checking ] See: Automatic Transmission/Transaxle/Fluid - A/T/Testing and Inspection.