Passat Wagon V6-2.8L (ATQ) (2000)
/Page-2335003.png)
-
Remove front bumper cover. See: Bumper/Front Bumper/Front Bumper Cover / Fascia/Service and Repair/Front Bumper Cover, Removing and
Installing
-
Remove noise insulation See: Sound Proofing / Insulation/Service and Repair
-
Remove intake air duct between lock carrier and air cleaner housing at lock carrier.
-
Remove bolt -3- and thread in special tool 3369 on left and right longitudinal.
-
Remove bolts -2- and -4- and pull lock carrier -1- toward front in area of special tool 3369.
