Passat Wagon V6-2792cc 2.8L DOHC (1994)
Timing Chain Guide: Diagrams
Drive Chain/Sprocket, Assembly
WARNING: DO NOT re-use any fasteners that are worn or deformed in normal use. Many fasteners are designed to be used only once and
become unreliable and may fail when used a second time. This includes, but is not limited to, nuts, bolts, washers, self-locking nuts or bolts,
circlips, cotter pins. For replacements always use new parts.
CAUTION:
-
Coolant/anti-freeze must not be reused when replacing engine. cylinder head. cylinder head gasket, radiator and heater core.
-
Always replace gaskets and seals, with exception of camshaft cover or sealing flange.
1 - Camshaft sprockets
2 - Distributor drive
3 - Bolt - 100 Nm (74 ft lb)
4 - Pivot pin - 25 Nm (18 ft lb)
5 - Tensioning plate
6 - Tensioner - 20 Nm (15 ft lb)
7 - Double drive chain
8 - Sprocket double drive chain
9 - Sprocket, single drive chain
10 - Chain tensioner with plate
11 - Bolt - 10 Nm (7 ft lb)
12 - Drive sprocket
-
installed on crankshaft
-
ground down tooth on bearing groove points toward TDC cylinder 1