Passat Wagon V6-2792cc 2.8L DOHC (1994)
Multi-function indicator check mode displays (See Illustration).
Instrument Cluster, Checking
The electronic components and instruments in the instrument cluster must match the appropriate vehicle equipment. The electronic unit in each
instrument cluster has an integrated test mode which can be checked to determine whether the cluster has the correct electronic components and
instruments to ensure that the vehicle specific input signals are processed properly and shown in the display. This check mode for the instrument cluster
can be used for troubleshooting and should be checked in all cases of complaints concerning the functioning of the instrument cluster (MFA).
Calling up instrument cluster check mode test
-
Switch ignition on
-
Press trip odometer reset button and hold down
-
Switch ignition off, then back on again
-
Release odometer reset button
The function number and data for the selected function appear in the display window of the speedometer. Press and release odometer reset button to
advance to next function.
Country codes:
1 - All countries (including Canada) except USA and Great Britain
3 - Great Britain
4 - USA
Distance pulse number
If the displayed value does not match the value in the table, the distance driven will be recorded incorrectly. The distance pulse number is a constant,
engine specific value. The distance pulses for any given driven distance can be calculated using the number in the table.
Troubleshooting
Note:
If the Multi-function indicator shows signs of malfunctioning such as, for example, unrealistic displays or no reaction to switch operation, disconnect
