Passat Wagon V6-2792cc 2.8L DOHC (1994)
Wiper Switch: Service and Repair
1. Obtain audio coded anti-theft code, then disconnect battery ground cable.
2. Remove steering wheel as outlined under "Steering Wheel, Replace".
3. Remove lower and upper trim cover attaching screws, then trim covers, as necessary.
4. Remove attaching screws, then detach switch unit from steering column.
5. Disconnect multi-pin connectors, then remove switch unit.
6. Reverse procedure to install, noting the following:
a. Lubricate turn signal cancelling ring with multi-purpose grease.
b. Reset audio coded anti-theft system.
