Passat Wagon 4Motion V6-2.8L (ATQ) (2003)
1
-
Air flow flap motor -V71-
2
-
Guide for plastic lever
3
-
Guide for metal lever
-
Connect connector.
-
Insert flap motor-1- into guide -arrow B-.
Position air flow flap and recirculated air flap levers -2 and 3- by hand according to position of flap motor.
-
Insert flap levers -2- and -3- into drive cam guides.
-
Plastic lever, position -2-
-
Metal lever, position -3-
-
Initiate Basic setting, Function 04, with VAG 1551 Scan Tool (ST); Climatronic On Board Diagnostic (OBD).
Temperature regulator flap motor -V68-, removing and installing
The temperature flap lever and operating rod are color coded "Red".
Removing
-
Remove instrument panel
-
Remove dust and pollen filter.
-
Loosen instrument panel cross member.
For the next steps, an assistant must lift and hold the heater/evaporator unit.
-
Remove footwell air outlet.
-
Remove air flow flap motor.