Passat Wagon 4Motion V6-2.8L (ATQ) (2003)
/Page-2337001.png)
Center Mounted Brake Lamp: Service and Repair
High Mount Brake Light
Bulb holder, removing and installing
Remove screws - arrows A-, unclip trim - arrows B- and remove.
-
Depress locking clips -arrows- and remove bulb holder -1- from mounting -2-.
NOTE: The bulb holder base plate contains soldered-in light emitting diodes (LEDs) that are not replaceable. In the event of LED malfunction, replace
complete bulb holder.
