Passat Wagon 4Motion V6-2.8L (ATQ) (2003)
Check center position on steering rack
-
Use special tool VAG 1907 to center the steering rack.
-
For a description of the procedure, Refer to Steering Gear, Service and Repair, Steering Gear, Vehicles With 4 or 6 Cylinder Engines, Removing
and Installing.
-
Check to make sure that the steering wheel is positioned as horizontally as possible on the steering column when the wheels are in the "straight
ahead" position.
-
Reposition steering wheel if necessary.
-
Remove special tool VAG 1907 after setting the toe/toe constant.
-
Seal steering gear with hex socket head bolt -1-; tightening torque, Refer to Power Steering Gear, Disassembling and Assembling, See item 9 and,
Refer to Power Steering Gear For Vehicles With 5, 6 or 8-Cylinder Engine, Disassembling and Assembling, See - item 19.
1 - Hex socket head bolt
2 - Threaded hole in steering gear