Passat Wagon 4Motion V6-2.8L (ATQ) (2003)
-
Remove bolts -.
CAUTION: Electrostatic charges may result in involuntary deployment of the airbag. Therefore, the mechanic must be electrostatically
discharged before disconnecting ignition - and Ground (GND) wires. This is done e.g. by briefly grasping the chassis or door striker.
-
Disconnect connector - from airbag unit -.
-
Pull off airbag unit - from backrest frame -.
Installing
-
Installation is the reverse order of removal.
-
Switch ignition on.
CAUTION: Make sure no one is in the vehicle.
-
Connect vehicle battery.