Passat Wagon 4Motion V6-2.8L (ATQ) (2003)
Alignment: Service and Repair
Front Camber
Front axle camber, centering
Special tools, workshop equipment, testers, measuring instruments and auxiliary items required
-
VAG 1941 Camber adjustment device
Only by moving the subframe it is possible to change the camber slightly.
-
Remove noise insulation tray.
-
Unscrew hex bolts -3- and -4-.
-
Insert camber adjustment device --VAG 1941-.
Tightening torque of hex bolts -1- 10 Nm.