Passat Wagon 4Motion V6-2.8L (ATQ) (2003)
Power Steering Pump: Service and Repair
Power steering pump, assembly overview for vehicles with 6-cylinder engine
Note:
-
Replace sealing rings.
-
Do not reuse drawn off hydraulic oil.
-
Hydraulic oil: Part No. G 002 000
-
Quantity of oil in system approximately 1 liter.
1. Pressure line with hose
2. Hex bolt, 8 Nm
3. Hole on intake line
4. Power steering pump
^
Checking delivery pressure, Refer to Power Steering Pump, Testing and Inspection, Power Steering pump delivery pressure for vehicles with
6-cylinder engine
^
Fill with oil before installing
5. Belt pulley
6. Hex socket head bolt, 25 Nm
^
When loosening and tightening counterhold with VAG 1590 if necessary
7. Hex bolt, 25 Nm
8. Hex socket head bolt, 25 Nm
9. Bracket
10. Ignition coil with bracket
11. Hex socket head bolt, 25 Nm
12. Banjo bolt, 50 Nm
13. Oil seal, 16 x 22
^
Always replace
14. Oil seal, 18 x 24
^
Always replace
15. Threaded union, 50 Nm
16. Hose clip
^
Tighten with VAG 1275