Passat Wagon 4Motion V6-2.8L (ATQ) (2003)
Removing upper control arm from mounting bracket
-
Tighten suspension strut in a vice (use protective clamps).
-
Unscrew both links -arrows-.
-
Unscrew nut -1- and take off mounting bracket.
Installing
-
Holes in spring plate -arrows- of suspension strut -1- must point towards center of vehicle.
-
Install new nuts -2- for suspension strut and tighten.
F = Forward
R = Right-hand mounting bracket
L = Left-hand mounting bracket
Installing upper control arm to mounting bracket