-
‒ A button must be pressed once, for at least 1 second, on each of the radio wave keys to be "learnt" (in example above, 3 keys).
Adaption is confirmed by a beep sound.
-
‒ Switch off ignition and remove ignition key.
-
‒ Perform functional check (e.g. 3) of radio wave keys.
Note:
All 3 keys (see example) can be "learnt" in one matching sequence.
15 seconds must not be exceeded when matching all ignition keys (pressing a button).
A successful adaption can be determined via Read measured value block, function 08, display group number 013, Page 01-134
. When operation the radio wave unit both of first measurement values must have the status OK. Simultaneously the last measurement value will show the positional number of the key (i.e. first, second, third, fourth key).
If the remote control key is operated several times the third display -no measured value- changes to "OK".
The adaption of ignition keys is automatically terminated when:
-
◆ number of keys to be adapted is reached.
-
◆ a button of one of the keys to be "learnt" is pressed frequently.
-
◆ Permissible matching period of 15 seconds is exceeded (fault is stored).
-
‒ Select function 02 "Interrogate fault memory". If there is no fault stored, the matching of the keys has been successfully completed.
-
‒ Press keys -0- and -6- to end the output.
|