Volkswagen Workshop Service and Repair Manuals

• Cover
• ◆ Material: PP/EPDM
• ◆ Removing and installing cover => Fig. 63-3
• Torx screw T 30
• ◆ 6 Nm (Qty. 7)
• Spreader nut
• Buffer
• Screw
• ◆ 1.5 Nm (Qty. 4)
• Screw - only for large bumper
• ◆ 1.5 Nm (Qty. 2)

• Spoiler
• ◆ Clipped into cover
• ◆ Is not necessary to remove when removing the cover
• Spreader rivet - only for large bumper
• ◆ (Qty. 4)
• Towing eye cover

Removing and installing cover

• ‒ Remove radiator grille with trim frame =>Page 66-3 .

• ‒ → Unclip trim panels -1- and -2- (only large bumper). Trim panel -1- is additionally bolted.
• ‒ Remove Torx bolts T30 (Qty. 7).
• ‒ Loosen securing devices to wheel housing lining and wing and pull bumper cover off.