Volkswagen Workshop Service and Repair Manuals

Note:

• ◆ Depending on the model, it is possible that slight changes to the removal and installing procedures may be necessary.

• Cover
• ◆ Material: PP/EPDM
• ◆ Removing:
• Screw
• ◆ Qty. 2
• ◆ 1.2 Nm
• Screw
• ◆ Qty. 6
• ◆ 1.2 Nm
• Guide
• ◆ To remove/install bumper, pull out or push in parallel to guides on left and right.

• Cable with connector for number plate light
• Securing strip
• ◆ Edge of bumper is held by securing strip
• Bumper strip
• ◆ Clipped into cover
• ◆ To renew, the bumper cover must be removed
• Screw
• ◆ Qty. 2
• ◆ 6.5 Nm
• Screw
• ◆ Qty. 2
• ◆ 6.5 Nm