Volkswagen Workshop Service and Repair Manuals

Moulding for roof removed

• ‒ Pull out securing clip -3-.
• ‒ Warm roof moulding for door -1- with a hot air blower before removing.

Installing

• ‒ Clean exterior panels with petrol, and afterwards treat with silicone remover and then rub dry.
• ‒ First locate roof moulding for door with securing clip -3- and then bond from clip to wing, piece for piece (areas must not be longer than 250 mm).
• ‒ Press complete roof moulding to door, on forcefully. Working temperature approx. 20° C.