volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Installing > < Removing and installing centre console 10.99 ?

Polo Mk3

Removing
Removing
–  Remove driver side storage compartment 10.99 ► → Chapter.
  Note
Selector lever knob and gaiter do not need to be removed in order to remove centre consol. Not shown in Figure to improve clarity.
–  Unclip coin box -1-, left cover -3- and right cover -4-.
–  Unclip trim -2-.
–  Unclip frame for handbrake -5-.
   

   
–  Remove two screws -1-.
–  Open glove compartment and unscrew screw -2-.
–  Remove trim -3-.

   
–  Unscrew self-tapping screws -1- and -2- (3 each).
–  Remove bolt -3-.
–  Remove bolt -4-.
–  Unscrew hexagon nuts -5-.

   
  Note
Rear area of centre console -1- is secured to tunnel with a clip -4-.
–  Unclip rear area of centre console -1- and swing up in -direction of arrow-.
–  Unscrew screws -2- and remove ashtray -3- from centre console.
–  Remove centre console.

   

Installing > < Removing and installing centre console 10.99 ?