Safety regulations for belt tensioners |
t
| Testing, removing, installing and repair work may only be performed by qualified personnel. |
t
| Belt tensioner components may be neither opened nor repaired; always use new parts (danger of accident). |
t
| Belt tensioner units which have received hard blows or been dropped on the floor must not be installed in vehicles. |
t
| Belt tensioner units which are mechanically damaged (dents, fractures) always must be renewed. |
t
| Storage and transportation are subject to laws governing explosive substances. |
t
| Belt tensioner unit must be installed immediately after removal from its packaging. |
t
| No tools with impact action may be used to remove the belt tensioner. |
t
| If work is interrupted, the belt tensioner unit must be returned to its packaging. |
t
| Leaving the belt tensioner unit unattended is prohibited. |
t
| The belt tensioner unit must not be treated with grease, cleaning or similar substances, nor may it be exposed to temperatures above 100 °C, even for short periods. |
t
| The pyrotechnic propellant has no expiration date; i.e. it has unlimited, maintenance-free life. |
|
|
|