Polo Mk3
Assembly overview |
1 - | Circlip |
2 - | Torx bolt |
q | 4 Nm |
q | Self-locking |
3 - | Bush |
4 - | Spreader pin |
5 - | Cover |
6 - | Spacer ring |
q | With old design only. |
q | In new design, spacer ring is cast onto trim → Item. |
7 - | Trim panel |
q | Removing: |
– | Remove backrest. |
– | Unscrew cross-head screw → Item and remove spacer ring → Item if necessary. |
– | Remove Torx screw → Item and pull off bush → Item. |
– | Lift rear trim over backrest fulcrum pin and slide forwards. |
8 - | Cross-head screw |
9 - | Adjusting knob |
10 - | Locating pin |
11 - | Retaining hook |