volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Installing > < Removing and installing (split folding) bench seat and backrest

Polo Mk3

Removing
Removing
   
–  Pull bench seat parts forwards and fold up.
  N72-0015
–  Press spring clips -1- in -direction of arrow- and guide out of hinges -2-.
–  Remove both parts of bench seat from vehicle.
–  Release both backrest parts and fold down.
  N72-0016
–  Pull off circlips -1- from pins of adapters -2- on middle bearing of backrest parts.
  N72-0027
–  At outer sides of backrest parts, press back locking hooks -1- with a screwdriver and pull backrest parts -2- up out of backrest fulcrums -3-.
–  Guide inner sides of backrest parts out of centre fulcrum.
  N72-0010

Installing > < Removing and installing (split folding) bench seat and backrest