Polo Mk3
| Assembly overview |
| 1 - | Padding wire |
| q | Attached into padding; attach and detach using awl -V.A.G 1636-. |
| 2 - | Seat cover |
| q | Removing: |
| – | Remove backrest → Chapter. |
| – | Remove seat cover and padding → Chapter. |
| 3 - | Tensioning wire for cover |
| q | First attach cover with clips, then attach to fasteners, pull tension wire tight and hook in |
| 4 - | Clamping strip |
| q | Fitted to rear of seat frame from beneath |
| q | Partly secured with three clips → Item. |
| 5 - | Padding |
| q | Removing: |
| – | Remove backrest → Chapter. |
| – | Remove seat cover and padding → Chapter. |
| 6 - | Clip |
| q | Only on seats whose clamping strip → Item is not plastic and on seat frames without barbs integrated onto the rear of the seat. |
| q | In renewing cover → Item, additionally use these clips if necessary to ensure the clamping strip → Item is seated correctly. |
| 7 - | Seat frame |
| 8 - | Hook in points for cover |
| q | On both sides. |
| 9 - | Support bar (sport seat only) |
| 10 - | Clip for cover |
