Polo Mk3
|
|
Note
t | The air conditioner compressor bracket and related components can be removed and installed without the refrigerant circuit being opened. |
t | To remove poly V-belt → Rep. Gr.13. |
1 - | Bracket for air conditioner compressor |
t | Part No. 045 903 143 E |
Removing |
– | Move lock carrier to service position → Rep. Gr.50. |
– | Remove alternator → Rep. Gr.27. |
– | Remove air conditioner compressor from bracket and secure to body with suitable material (e.g. welding wire) → Chapter. |
– | Unbolt bracket from cylinder block. |
Installing |
When installing, always note: |
l | Renew securing bolts. |
2 - | Hexagonal combi bolt M10×45 |
q | 45 Nm. |
q | Qty. 6 |
3 - | Refrigerant hoses |
4 - | Air conditioner compressor |
Removing: |
q | Remove hexagon bolts → Item. |
q | Remove air conditioner compressor from bracket and secure to body with suitable material (e.g. welding wire) → Chapter. |
5 - | Hexagon bolt M8x100 |
q | 25 Nm. |
q | Qty. 3 |
6 - | Poly V-belt |
q | Removing and installing → Rep. Gr.13. |
q | Poly V-belt routing → Chapter. |
7 - | Tensioner |
8 - | Hexagon bolt M8×50 |
q | 25 Nm. |
q | Qty. 3 |