volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Installing > < Removing and installing fresh air and air recirculation flap control motor V154

Polo Mk3

Removing
Removing
–  Remove dash panel → Rep. Gr.70.
  Note
t  A new control motor is supplied in the “Air recirculation” end position.
t  The control motor is easier to install in the centre position.
To move the control motor to the centre position, proceed as follows:
   
–  Attach voltage supply connector -1- to control motor.
–  Switch on ignition.
–  Press fresh air and air recirculation button.
When centre position has been reached
–  Pull voltage supply connector off control motor.
  N80-0236

Installing > < Removing and installing fresh air and air recirculation flap control motor V154