volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Adjusting cable at temperature flap > < Dismantling and assembling heater unit

Polo Mk3

Installing and adjusting cables
Installing and adjusting cables
  Note
t  First connect the cables to the removed controls then adjust and secure the cables to the levers on the heater.
t  Place Bowden cable sheath against stops on controls and secure.
t  Adjust cables at flap levers with controls installed.
t  When control knobs are turned, all flaps must audibly contact stop.
   
1 - Temperature flap cable
q   From temperature control rotary knob to temperature flap.
q   Blue sheath.
q   Adjusting cable at temperature flap → Chapter.
2 - Footwell/defroster flap cable
q   From air distribution control rotary knob to footwell/defroster flap.
q   Black sheath.
q   Adjust cable at footwell/defroster flap → Chapter.
3 - Central flap cable
q   From air distribution rotary control to central flap.
q   Yellow sheath.
q   Adjusting cable at central flap → Chapter.

   

Adjusting cable at temperature flap > < Dismantling and assembling heater unit