–
| Press “02 Read fault memory”-arrow- on the display. |
Note The fault information displayed is updated not continuously but only upon initiating self-diagnosis or activating function 05 “Erase fault memory”. |
The stored faults are shown on the display. |
–
| Press Print button in display and then “Screen” in print menu. |
A list of faults can be found in the fault table → Chapter. |
The printer of the vehicle diagnosis, testing and information system -VAS 5051A- prints the faults shown on the screen or “0 faults detected”. If faults are stored, repair measures are required. The fault log must be handed over for the repair. |
|
|
|