Volkswagen Workshop Service and Repair Manuals

• Brake fluid reservoir
• Supply hose
• ◆ Upper part
• Angle piece
• Supply hose
• ◆ Lower part
• Master cylinder
• ◆ Removing and installing
  
• Clip
• Clutch pedal
• ◆ Removing and installing => page 30-6

• Retainer
• ◆ Replace only with master cylinder removed
• ◆ Removing =>Fig.1
• ◆ Pressing on =>Fig.2
• Self-locking hexagon nut, 25 Nm
• ◆ Always renew
• Seal
• ◆ Pull onto pipe/hose connection
• ◆ Moisten with brake fluid when inserting
• Pipe/hose assembly
• ◆ Allocate using parts catalogue
• Bracket
• ◆ Secured to body
• Dust cap
• Bleed valve
• ◆ Bleeding clutch system
  => page 30-22

• Slave cylinder
• ◆ Remove the following components before removing slave cylinder:
• ‒ Gear selector cable from gear selector lever
• ‒ Relay lever and actuating arm for gate selector cable => Page 34-1
• ◆ After installing adjust gear selector mechanism
• Clip
• Hexagon bolt, 25 Nm
• Gearbox
• Seal
• ◆ Pull onto pipe/hose connection
• ◆ Insert with brake fluid
• Hose bracket
• ◆ Secure to control cable/gear selector cable support bracket

→ Fig.1     Lever retainer -A- off in direction of arrow

→ Fig.2     Press master cylinder operating rod in retainer -A- in direction of arrow