Volkswagen Workshop Service and Repair Manuals

• Gear stick knob
• ◆ Screw on and off together with gaiter
• Cover
• ◆ Separating from gear stick knob => Fig.1
• ◆ Connect to gear stick knob before installing Fig.1
• ◆ Remove and install together with gear stick knob
• Sleeve
• Clamp
• ◆ To secure gear stick knob on gear stick
• ◆ Secure on gear stick knob -item 1 - using pliers V.A.G 1275
• Frame

→ Fig.1     Separating cover from gear stick knob and assembling to gear stick knob

• ‒ Turn cover inside out.
• ‒ Carefully lever clamping sleeve (arrow) off with a screwdriver and pull the gear stick knob out.

Installation is carried out in the reverse sequence, when doing this note the following:

• ‒ Insert gear stick knob in cover.
• ‒ Push clamping sleeve onto gear stick knob and engage.
• ‒ Install gear stick knob and gaiter together.