volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Installing gear stick gaiter to gear stick knob > < Servicing selector mechanism (rod selector mechanism)

Polo Mk3

5-speed manual gearbox 085
Servicing selector mechanism (rod selector mechanism)
I - Servicing gear stick housing and selector rod
 
N34-0143
  • Gear stick knob
  • Cover
    • ◆ Pull off from frame
    • ◆ Connect to gear stick knob before installing
  • Sleeve
  • Clamp
    • ◆ To secure gear stick knob on gear stick
  • Selector rod
  • Gearbox selector lever
  • Gasket
    • ◆ Between selector housing and floor
    • ◆ Self-adhesive
    • ◆ Bond to gear stick housing
 
N34-0143
  • Plastic nut
    • ◆ For console on gear stick housing
    • ◆ Remove before removing gear selector mechanism
  • Spacer sleeve
    • ◆ Between console and gear stick housing
  • Selector housing
  • Gasket
    • ◆ Between gear stick housing and base plate
    • ◆ Self-adhesive
    • ◆ Bond to gear stick housing
  • Gasket
  • Cable
    • ◆ Ensures that the assembly movement is not transmitted directly to the gear stick.
 
N34-0143
  • Selector rod bearing
    • ◆ Multi component
    • ◆ Is destroyed during removal
    • ◆ When installing ensure that both plastic half cups are not pressed apart
  • Bolt
  • Hose clip
  • Hexagon nut, 20 Nm
    • ◆ After installing adjust gear selector mechanism
  • Angle finger
  • Mounting bush
  • Hexagon bolt, 20 Nm
  • Selector finger

Installing gear stick gaiter to gear stick knob > < Servicing selector mechanism (rod selector mechanism)