Volkswagen Workshop Service and Repair Manuals

Vehicles from 07.99

• Plug, 15 Nm
• ◆ Always renew seal =>Fig.1
• ◆ Checking ATF level and topping-up => Page 37-81
• O-ring
• ◆ Always renew
• Solenoid valve 3 -N90-
• ◆ Grey
• O-ring
• ◆ Always renew
• O-ring
• ◆ Always renew
• Solenoid valve 6 -N93-
• ◆ Pink
• O-ring
• ◆ Always renew
• Solenoid valve 4 -N91-
• ◆ Blue

• Retainer
• ◆ For solenoid valves
• Nut, 9 Nm
• O-ring
• Solenoid valve 2 -N89-
• ◆ Yellow
• Solenoid valve 1 -N88-
• ◆ Green
• O-ring
• ◆ Always renew
• Bolt, 8 Nm
• Valve chest
• ◆ Removing and installing
  => from page 37-107
• ◆ Marking =>Fig.2

• Spool valve
• ◆ Secure against falling out when removing the valve chest
• Wiring harness
• ◆ For solenoid valves
• O-ring
• ◆ Always renew
• ◆ For connector/wiring harness
• Connector
• ◆ For wiring harness
• ◆ Removing => from Page 37-109
• ◆ When installing, ensure that it is in gearbox housing
• O-ring
• ◆ Always renew
• ◆ Removing and installing
  => from Page 37-109

• Gearbox housing
• Bolt, 9 Nm
• ATF screen
• ◆ To renew: remove and install oil pan
• Magnet
• ◆ Place the support in the oil pan
• Overflow pipe
• ◆ Remove when draining ATF
  => Page 37-94
• Bolt, 8 Nm
• Oil pan

Sequence => from page 37-94 , Dismantling and assembling planetary gearbox

Solenoid valves up to 06.99:

•      A -     Solenoid valve N88 (green)
•      B -     Solenoid valve N89 (yellow)
•      C -     Solenoid valve N90 (grey)
•      D -     Solenoid valve N91 (blue)
•      E -     Solenoid valve N93 (pink)
•      1 -     Torque setting => from page 38-31 , 10 -Nut