| Installation sequence of oil supply line |
| –
| Remove noise insulation. |
| –
| Place Drip tray -V.A.G 1306- or drip tray for workshop hoist -VAS 6208- underneath. |
| –
| To remove, unclip intake hose from lock carrier and unscrew from air filter housing. |
| –
| Unscrew union nut → Item from oil filter bracket → Item. When doing this counterhold connection → Item. |
| –
| Unscrew bolt → Item from face side of engine. |
| –
| Unscrew union nut → Item from turbocharger → Item. When doing this counterhold connection → Item. |
| –
| Remove oil supply line → Item. |
| Installation is carried out in the reverse sequence of removal. In the process, note the following: |
Caution | The following procedure for the installation of the oil supply line must be strictly adhered to. |
|
| –
| Screw bracket → Item with nut → Item loosely to exhaust manifold. |
| –
| Tighten union nut → Item on oil filter bracket → Item to torque setting. When doing this counterhold connection → Item. |
| –
| Tighten union nut → Item on turbocharger → Item to torque setting. When doing this counterhold connection → Item. |
| –
| Tighten bolts → Item to torque setting. |
| –
| Tighten nuts → Item to torque setting. |
|
|
|
